Smart Control allows you to remotely turn on and off any electrical appliance around your home, pool and spa from a distance. No wiring is needed. Simply plug in your appliances to Smart Control and begin operating them with the remote control. Just plug and play!

The Smart Control system starts with a basic twin power point control – the Link Control Unit (LCU) dual and a hand held remote control. This automates two appliances. You can then simply add two power points at a time and control up to 8 appliances from the one remote control. The remote can turn appliances on and off from up to 100 metres away!

You can easily build very sophisticated control systems with the Master Control Unit (MCU). The MCU can control up to 32 plug in appliances as well as manage up to 16 programmable schedules. Again you can start with a simple two plug system and then add two power points at a time as you need them. For those higher power appliances the Link Control Unit (LCU) single gives you a 15 amp power plug option.

MV3 Pump Saver

The MV3 MultiTimer Controller is designed to provide automation for pool pressure cleaning systems. On start-up, the MV3 has a built in delay of 16 minutes. The delay allows the filtration system to be fully operational before the booster pump is activated, eliminating the risk of the booster pump running dry due to the system not being fully primed. Override on/off functions allow flexibility of operation.

MV3 Pump Saver with Power Separator
The MV3 MultiTimer Controller with Power Separator is designed to provide automation for pool pressure and infloor cleaning systems. On start-up, the MV3 has a built in delay of 16 minutes. The delay allows the filtration system to be fully operational before the booster pump is activated, eliminating the risk of the booster pump running dry due to the system not being fully primed. Override on/off functions allow flexibility of operation.
If the cleaner pump is operated with filtration through a chlorinator, the integrated power separator function allows the cleaner pump to be powered separately to avoid electrical overload of the chlorinator.

MV3 Pump Saver with Flow Check Valve

The MV3 MultiTimer Controller with Flow Check Valve is designed to provide automation for pool pressure and infloor cleaning systems. On start-up, the MV3 has a built in delay of 16 minutes. The delay allows the filtration system to be fully operational before the booster pump is activated, eliminating the risk of the booster pump running dry due to the system not being fully primed. Override on/off functions allow flexibility of operation.

If the cleaning system is integrated with filtration a flow check valve option may be installed in the piping after filtration and prior to the cleaner pump takeoff to ensure the system is primed before the cleaner pump is operated.

MS3D Solar Controller UP DOWN

The multi solar up down controller automatically controls pool heating by measuring the temperature of the water going to the solar collector, and comparing it with water returning to the pool. The unit has a real time clock and will run between 8am and 6pm. The unit is ideal for solar systems where the roof is not accessible or easy controller replacements.

ACPS Power Separator

The Power Separator allows a timer to control two pumps without overloading the timer by separating the electrical load.

Multi eClock Timer

The Multi eClock offers a simple plug in digital timeclock with battery backup of time and settings. The eClock has a large easy to read display, on / off override and housed in a UV stabilized ABS plastic housing.

• Brochure_Waterco Smart Controllers.pdf

Tel : 076-513100-4